If camera is not powering on, the SD card could be corrupt, or the camera may have lost power during a firmware update.
To determine the reason the camera is not powering on remove SD card and power camera on.
- If the LED on the front of the camera lights up RED, the camera is working properly. You will need to format the current SD card or replace the current SD card.
- If you do not see any LED's light up on the front of the camera, 1) the batteries may be dead, or 2) the camera has been bricked during an update and will need to be returned for repair.
Also, keep in mind, powering camera on in a metal building or near other electronics may cause interference that prevents camera from gaining signal.