Remotely / over-the-air:
Launch your Scoutek app and navigate to the Cameras page. From there, select the Actions button and choose Update Firmware.
Please note: Data rates are applied. The typical firmware file is 7-10 MB of data.
Manual Update:
From a computer, visit www.Scoutek.com and log in to your account. Select Cameras from the menu. Select the firmware version number listed below Firmware. A separate window will open. From there, download the UPDATE.BRN file. Then copy/paste the file onto a newly formatted SD card.
With the camera in hand, insert the SD card containing the UPDATE.BRN file. Verify the camera's batteries are fully charged, so the camera does not lose power during the update. Press and HOLD the reset button, then switch camera to Online mode while continuing to hold the reset button. Once all LEDs begin to flash RED, you may release the reset button. Once the update is complete, the camera will reboot, and send a status report. Refresh your Scoutek app and view the status report to confirm the camera is on the latest firmware update.
Formatting the SD card once the camera has updated is recommended.