Remotely / over-the-air:
Launch your Scoutek app and navigate to the Cameras page. From there, select the Actions button and choose Update Firmware.
Please note: Data rates are applied. The typical firmware file is 7-10 MB of data.
From a computer, visit www.Scoutek.com and log in to your account. Select Cameras from the menu. Select the firmware version number listed below Firmware. A separate window will open. From there, download the UPDATE.BRN file. Then copy/paste the file onto a newly formatted SD card.
Note: Ensure the file name reads UPDATE.BRN. Any additional letters or numbers will cause the update to fail.
With the camera in hand, insert the SD card containing the UPDATE.BRN file, and switch the camera to Set Up mode. Verify the camera's batteries are fully charged, so the camera does not lose power during the update. Once the camera powers up, open the menu, click the up arrow until Firmware is selected. Press Enter and choose Update. Once the update is complete, allow the camera to reboot on its own.
Please note: If your camera's current firmware version is 20210122A, a manual update is required.